Leviton® Decora® ODS10-IDI 1-Pole Occupancy Sensor, 120/230/277 V AC, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing
Model:ODS10-IDI
Item:EMS1035479
UPC:078477010198
Pickup or Delivery
Only 1 left in stock at Fresno Branch order soon
Shipping
0 available
$110.38/Each
Leviton® Decora® ODS10-IDI 1-Pole Occupancy Sensor, 120/230/277 V AC, Passive Infrared Sensor, 2100 sq-ft Coverage, 180 deg Viewing
Model:ODS10-IDI
Item:EMS1035479
UPC:078477010198
Pickup or Delivery
Only 1 left in stock at Fresno Branch order soon
Shipping
0 available
$110.38/Each
Product Information
Brand : Leviton®
Alternate Part Number : 7316283
The ODS10 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
- ColorIvoryControl OutputManual On/Automatic OffCountry of OriginCNCoverage2100 sq-ftDimensions1.75 in W x 1.85 in D x 46 in HLamp TypeFluorescent/IncandescentManufacturer NameLevitonPower Rating100/250 mWResponse Frequency50/60 HzSensor TypePassive InfraredTemperature Rating0 to 50 deg CTime Delay30 s to 30 minType1-PoleViewing Angle180 degVoltage Rating120/230/277 V AC
- Small Offices, Conference Rooms, Classrooms, Lounges and Commercial Applications
- Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units
- Low profile design eliminates obtrusive scanning-device look
- Convenient pushbutton provides manual ON/Off light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive minor motion area where even slight body movements will be detected
- Vandal-resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual On/auto Off mode for installations where manual On switching is required but auto Off switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed Off time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximum energy savings
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning On automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold Off feature once level has been set
- Vacancy confirmation when the time out expires and the lights turns Off, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
- 1-unit can be used for 120 to 277 VAC lighting
- Compatible with both electronic and magnetic ballasts
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
- Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service
- No neutral design is optional for retrofit applications
- https://www.youtube.com/embed/vekEu7H-Tmo
- CSA Certified|CEC Title 20/24 Compliant|NOM Compliant|FCC Certified|UL Listed