Fluke® FLUKE-773 Milliamp Process Clamp Meter, 0 to 30 VDC, 0 to 100 mA, Backlit Display
Model:FLUKE-773
Item:EMS1089350
UPC:095969475822
Pickup or Delivery
Out of stock at Fresno Branch
Shipping
0 available
$2,729.07EA
Pack: BOX
Fluke® FLUKE-773 Milliamp Process Clamp Meter, 0 to 30 VDC, 0 to 100 mA, Backlit Display
Model:FLUKE-773
Item:EMS1089350
UPC:095969475822
Pickup or Delivery
Out of stock at Fresno Branch
Shipping
0 available
$2,729.07EA
Pack: BOX
Product Information
Brand : Fluke®
Alternate Part Number : 3362365, 10600093
Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke® 773 mA Clamp Meter is Fluke®'s premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power.
Additional Resources
- Country of OriginCNDimensions11.61 in L x 5.91 in W x 2.95 in HDisplay TypeBacklitElectrical Ratings0 to 30 VDC, 0 to 100 mAManufacturer NameFlukeMaterialPlasticOperating Temperature-10 to 50 deg CPower Source(4) 1.5 V AA Alkaline BatteriesTypeMilliamp ProcessVoltage Accuracy0.2% + 2 Counts
- For use to measure output signals without breaking the loop or bringing down the system
- (4) AA Alkaline Batteries (Installed), Soft Carrying Case, TL75 Test Leads, AC 72 Detachable Clip, TL940 Mini Hook Test Leads, Instruction Sheet, Hanging Tool With Hook and Loop Strap
- Hard plastic enclosure type
- Measurement spotlight illuminates hard to see wires in dark enclosures
- Best in class 0.2% accuracy
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measure 4 to 20 mA signals without "breaking the loop"
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
- -25 to 60 deg C storage temperature, IP 40 IP, 0.177 in or 4.5 mm Max diameter of measurable conductor, < 90% at < 30 deg C, < 75% at 30 to 55 deg C operating humidity, 0 to 2000 m operating altitude, random 2 g, 5 to 500 Hz vibration, 1 meter drop test shock, 0.01% deg C temperature coefficient, (4) AA 1.5 V alkaline, IEC LR6, 40 hours typical power, battery life
- Simultaneous mA in-circuit measurement with 24 V loop power for powering and testing transmitters, source 4 mA to 20 mA signals for testing control system I/O or I/Ps, measure 4 mA to 20 mA signals with in-circuit measurement
- Scaled mA output provides a continuous mA signal that corresponds to the 4 mA to 20 mA signal measured by the mA clamp, enables milliamp signal logging to a separate logging device without breaking the loop
- Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop, apply a mA input signal to a device and measure its 4 to 20 mA output on devices such as valves or mA isolators voltage output linear ramp or 25% step output, automatically change the voltage output for remote testing
- 0 to 20.99 mA at 0.2% + 2 counts accuracy, 21.0mA to 100.0 mA at 1% + 5 counts accuracy measuring range
- ECCN 3A992|CE Certified|FCC Approved|Meets EN 61326-1|N10140 Registered|PROP65: This product is in Compliant with PROP65; it is not known to contain any chemicals associated with this regulation