Electric Motor Shop | Browning®

44 items

Show:

Sort by:

: Show In Stock Only
: Belt Guards (2)
Bushing Kits (3)
Classical Belts (1)
Flange Mount Ball Bearing Units (1)
Gear Drive Backstops (2)
Gear Drive/Gearmotor Mounts (9)
Gear Drive/Gearmotor Replacement Parts (2)
Mounting Brackets (2)
Multiple Groove Sheaves (2)
Pillow Block Ball Bearing Units (6)
: 1.793 in Small End/1.9375 in Large End (1)
3-3/8 in (6)
: 1-1/2 in (2)
1-11/32 in (1)
1-13/32 in (2)
1-3/4 in (1)
: 1-1/4 in (1)
1-5/16 in (2)
1-7/16 in (2)
1-9/16 in (1)
: Steel (1)
: 2 in (2)
2-3/4 in (1)
3-11/16 to 4-9/16 in (1)
3-23/32 to 4-17/32 in (1)
3-25/64 to 4-11/64 in (1)
4-5/32 to 5-3/32 in (1)
: 2-7/16 in (1)
3-1/4 in (6)
: 1 in (4)
1-1/4 in (1)
1-1/8 in (1)
1-3/16 in (1)
1-3/8 in (1)
1-5/8 in (1)
1-7/16 in (1)
1/2 to 1-15/16 in (1)
2-3/16 in (1)
2-7/16 in (1)
: Round (6)
Split Taper (3)
: 2-15/16 in ID x 2-15/16 in OD (1)
2-7/16 in ID x 2-7/16 in OD (1)
2.1875 in ID x 2-7/16 in OD (1)
: B (1)
H (2)
MPB (1)
: 6.08 in (1)
7.01 in (1)
: #40 (1)
: Black (2)
: CN (6)
MX (17)
US (21)
: 14.5 in L x 13.98 in W x 18.47 in H (1)
16.25 in L x 15.7 in W x 20.88 in H (1)
4-3/4 in Dia (1)
4.88 in OD x 4-1/8 in L (2)
5 in Dia (1)
5.31 in OD x 5-5/8 in L (1)
: 80 % (2)
: Non-Expansion (Fixed) (6)
: 0.563 in (1)
1-23/32 in (1)
1-3/8 in (1)
3/4 in (1)
: Gray Painted (8)
: 3 in (1)
: 4-Bolt (1)
: 13/32 in (1)
: 15:1 (2)
: 1 hp (2)
: 1-1/2 in (1)
2.391 in (1)
: 0.438 in (1)
1/32 in (1)
19/32 in (1)
5/8 in (1)
: 1750 rpm (2)
: 1.44 in Dia x 5.12 in L (1)
1.87 in Dia x 5.87 in L (1)
: Solid Shaft (2)
: 1/2 x 1/4 in (1)
1/4 x 1/8 in (2)
3/8 x 3/16 in (2)
5/16 x 5/32 in (1)
5/8 x 5/16 in (1)
: 1 in (1)
: 2611 lb Dynamic/1444 lb Static (2)
2801 lb Dynamic/1651 lb Static (4)
4381 lb Dynamic/2567 lb Static (1)
: Set Screw (7)
: Synthetic/Mineral Oil (2)
: Regal Beloit (5)
Regal Rexnord (44)
: Aluminum (1)
Cast Iron (11)
Ductile Iron (3)
Neoprene (3)
Sintered Steel (1)
Steel (16)
: 3500 rpm (1)
4500 rpm (1)
5500 rpm (3)
6500 rpm (2)
: Tapped Base (2)
Two-Bolt Base (4)
: 2 (6)
3 (1)
: 2 (2)
72 (1)
: 1 (1)
2 (1)
: 130 (1)
18 (1)
: 116.67 rpm (2)
: 2-15/16 in (1)
2-7/16 in (1)
: Tapered Bore (2)
: 11.28 in (1)
3.14 in (1)
3.95 in (1)
4.564 in (1)
9-1/4 in (1)
: 116 in (1)
180 in (1)
: 1-7/16 in (1)
: 2-11/16 in (1)
2-13/16 in (2)
2-15/32 in (1)
2-9/16 in (1)
3-3/4 in (1)
3-5/32 in (1)
: 1 in (1)
1-1/2 in (1)
1-13/32 in (1)
1-3/4 in (6)
2-15/16 in (1)
2-35/64 in (1)
2-7/8 in (1)
26 in (1)
3 in (1)
5 in (1)
: 3-3/4 in (1)
: 1/5 in (2)
: 11.1 in (5V)/10.8 in (A)/11.3 in (B) (1)
2.879 in (1)
3.9 in (A)/3.36 in (3L) (1)
4.584 in (1)
9.2 in (A)/8.66 in (3L) (1)
: Fiberglass (1)
Polyester (1)
Synthetic Fiber (1)
: 1/2 x 1 in (6)
5/16 x 1 in (1)
: Nitrile Rubber (1)
: Single Lip (1)
Single Lip Contact with Flinger (5)
: 8V (1)
GBCX (1)
: AK Series (2)
B5V® (1)
VF4S 200 (1)
VPLS 200 (3)
VPS 100 (1)
VTBS 200 (2)
: 15 in W x 6-1/2 in D x 45-1/2 in H (1)
20-1/4 in L x 24 in W (2)
21 in W x 6-1/2 in D x 55-1/2 in H (1)
: 11.43 to 21-3/4 in Motor Base to Output Center (1)
18 to 30 in L Center Distance (1)
22 to 34 in L Center Distance (1)
27 to 33 in L Torque Arm, 0.44 in Bolt (2)
5-1/8 in Length Through Bore, 4.88 in OD (2)
5-5/8 in Length Through Bore, 5.31 in OD (1)
: 3/8 in W Type XL Belt (1)
4L/A and 3L Cross Section Belt (1)
Browning® Multiple Groove Sheave (1)
Browning® Sprockets and HPT Chain Synchronous Belt Drives (6)
Classical Gripbelt® 4L/A and 3L Cross Section Belts (1)
Gripbelt® A and B, 5V Cross Section Belts (1)
Size 207 Shaft Mount Reducer (1)
Size 215 Shaft Mount Reducer (1)
Size 307 Shaft Mount Reducer (1)
TorqTaper® Plus 143T to 286T NEMA Frame Helical Shaft Mount Speed Reducers (1)
: 1-1/2 in/ft (6)
: 180 deg F (2)
250 deg F (1)
: -20 to 200 deg F (7)
: 17/32 in (1)
29/32 in (1)
: 1 in (1)
7/8 in (1)
: 11600 in-lb (6)
36.013 in-lb Input/540.19 in-lb Output (2)
: Arm Type 4 (1)
Cogged (1)
High Base (1)
High Performance (1)
Intermediate Duty (1)
Non-Cogged (1)
Normal Duty (5)
Normal Duty Non-Expansion Round/Straight Bore (1)
Single Strand Finished Bore Type 1 (1)
Taper Bore (3)
: 3/8 in (1)